For more information on how to perform a site survey, please see our site survey page.Įnsure that the placement of the dish will allow the mount to be securely fastened so the antenna will not come loose or be misaligned due to strong winds, or be subjected to accidents or vandalism. No trees or buildings can be situated where they will block the signal from reaching the dish. Before you install the antenna, you must ensure that the location you select will allow a clear line of sight to the satellite. You should still read the installation instructions provided with your satellite antenna and receiver and make sure your antenna is grounded before considering the installation to be over!Īlways make sure that your satellite receiver is on channel 299 while you are searching for the signal.Ĭonsult the look angles calculator and record the compass heading and elevation for the location nearest you. This guide focuses on the alignment procedure of your satellite antenna. If you follow these instructions carefully, you will not have much difficulty in optimizing the signals for your system. The satellite broadcasts with power equivalent to only a 50 watt light bulb so proper installation of the dish is critically important. It is important not underestimate the detail involved in pointing your dish accurately to obtain maximum performance. Shaw Direct uses both the Anik F1 (107.3°W) Anik F2 (111.1°W) satellites.
